E6100 Industrial Adhesive
E6100 has the strength of E6000, but this non-sag formula won’t slump or run. It’s a perfect choice for overhead and vertical applications when nails won’t work.
- Non-slump – won’t sag, drip or run on vertical or horizontal applications
- Tough – Stronger and 30X more flex than Polyurethane! Strong enough for repairing and securing architectural elements
- Chemical resistant – safe for applications exposed to dilute acids and dilute caustics
- Waterproof – can be submerged in fresh or salt water after complete cure
- Paintable – paint to make UV-resistant
- Temperature resistant – unaffected by extreme heat or cold once cured
- Flexible – excellent for bonding items subject to vibration
WARNING: This product can expose you to chemicals including toluene which is known to the ?state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
| Size | 10.2 oz |
| Color | Clear |
INSTRUCTIONS
Follow these step-by-step directions when using E6100:
Read directions and test small area before use.
- Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
- Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). However, fully cured adhesive can withstand temperatures from 40 to 180 °F (-40 to 82 °C) intermittently.
- Apply directly to surfaces to be bonded or repaired.
- Allow 24 hours for curing–Maximum bond strength may not be reached for up to 72 hours.
- For prolonged storage after opening, cover or plug the opening of the nozzle.
- Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.
Product is paintable and immediately resistant to precipitation upon application.
E6100工業黏合劑
E6100 的強度與 E6000 相當，但這種不垂流配方不會發生下垂或流動。它是釘子無法使用的高空和垂直施工的理想選擇。
- 不塌陷－無論垂直或水平應用，都不會下垂、滴落或流淌。
- 堅韌耐用－比聚氨酯更結實，柔韌性高30倍！強度足以用於修復和加強建築構件。
- 耐化學腐蝕－可安全用於接觸稀酸和稀鹼的應用場合
- 防水－完全固化後可浸入淡水或鹽水中
- 可塗漆－塗漆使其具有抗紫外線能力
- 耐溫性好－固化後不受極端高溫或低溫的影響
- 柔韌性好－非常適合黏合易震動的物品
警告：本產品可能使您接觸到包括甲苯在內的化學物質，加州已知甲苯會導致出生缺陷或其他生殖危害。更多資訊請造訪 www.p65warnings.ca.gov。
| 尺寸 | 10.2盎司 |
| 顏色 | 透明色 |
指示
使用 E6100 時，請依照下列步驟操作：
使用前請閱讀說明書並進行小面積測試。
- 表面應清潔、乾燥且無污垢。為獲得最佳效果，使用前請輕輕打磨表面。
- 修剪噴嘴末端。刺破內密封圈。理想的施工溫度範圍為 50 至 90 °F（10 至 32 °C）。但是，完全固化的黏合劑可以間歇性地承受 40 至 180 °F（-40 至 82 °C）的溫度。
- 直接塗抹於需要黏合或修復的表面上。
- 固化需24小時－最大黏合強度可能需要長達72小時才能達到。
- 開封後如需長時間存放，請蓋住或堵住噴嘴開口。
- 用丙酮或柑橘類溶劑清潔未固化的黏合劑。固化的材料可以透過切割或刮擦去除。
本產品可上漆，塗抹後立即具有防雨性能。
